centos安裝多個php的方法：首先為yum引入EPEL庫和REMI庫；然后通過命令“yum-config-manager –enable remi-php71”啟用PHP源“remi-php71”；接著安裝并配置好“php56”即可。

centos中安裝多版本php并同時用于nginx

在新建的虛擬機中安裝了php7, 安好了才發現一些老一點的項目跑不了了, 由于php7版本較php5版本有了較大修改, 很多函數已經不是廢棄, 而是移除了, 導致很多問題. 只好再安裝一個php版本了, 我要安裝的是php5.6, 在網上搜了linux中的php多版本管理, 推薦了phpenv, 搞了一通, 沒有結果, 只好換個方法了, 直到我發現了這篇文章, 直接解決. 下面給大家介紹安裝及配置過程.

推薦：《centos教程》

這種情況下其實可以通過直接在一個linux系統中通過yum等工具安裝好不同的PHP版本, 分別注冊PHP-FPM服務, 配置到服務器中即可.

實驗環境

CENTOS7

Nginx v1.12.2

PHP7(設置為系統默認PHP版本)和PHP5.6

服務器IP 192.168.56.100

安裝PHP7與PHP5.6

首先為yum引入兩個庫: EPEL與REMI, 因?yàn)檫@個兩個庫為我們提供最新的PHP版本源, CENTOS 自帶的yum庫中PHP版本都太老舊了.

# yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm # yum install http://rpms.remirepo.net/enterprise/remi-release-7.rpm

安裝php71

# yum-config-manager --enable remi-php71  [Default] # yum install php php-common php-fpm # yum install php-mysql php-pecl-memcache php-pecl-memcached php-gd php-mbstring php-mcrypt php-xml php-pecl-apc php-cli php-pear php-pdo

第一句用于啟用PHP源remi-php71

安裝php56

# yum install php56 php56-php-common php56-php-fpm # yum install php56-php-mysql php56-php-pecl-memcache php56-php-pecl-memcached php56-php-gd php56-php-mbstring php56-php-mcrypt php56-php-xml php56-php-pecl-apc php56-php-cli php56-php-pear php56-php-pdo

在linux中執行php -v, 驗證一下, 當前的php版本應該是7.1

安裝好之后, 下面就要配置php-fpm與php56-php-fpm, 他們是php的Fastcgi進程管理器, linux中web服務器調用php處理就是通過他們.

好了,開始配置吧.

兩個php版本分別對應的配置文件為

php-fpm (default 7.1) – /etc/php-fpm.d/www.conf php56-php-fpm – /opt/remi/php56/root/etc/php-fpm.d/www.conf

(很神奇, 安裝php56版本的目錄是在opt目錄下)

打開兩個配置文件, 更改如下代碼

listen = 127.0.0.1:9000[php-fpm] listen = 127.0.0.1:9001[php56-php-fpm]

如果是通過socket通信方式調用php-fpm的情況, 則更改代碼如下

listen = /var/run/php-fpm/php-fpm.sock[php-fpm] listen = /opt/remi/php56/root/var/run/php-fpm/php-fpm.sock[php56-php-fpm]

分別注冊并啟用兩個版本的php-fpm服務

# systemctl enable nginx  # systemctl start nginx  # systemctl enable mariadb  # systemctl start mariadb  ---------------- PHP 7.1 ----------------  # systemctl enable php-fpm  # systemctl start php-fpm  ---------------- PHP 5.6 ---------------- # systemctl enable php56-fpm  # systemctl start php56-php-fpm

使用php7的nginx服務器配置

server {     listen 80;     server_name example1.com www.example1.com;     root   /var/www/html/example1.com/;     index index.php index.html index.htm;     #charset koi8-r;     access_log /var/log/nginx/example1.com/example1_access_log;     error_log   /var/log/nginx/example1.com/example1_error_log   error;     location / {     try_files $uri $uri/ /index.php?$query_string;     }     # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000     location ~ .php$ {     root    /var/www/html/example1.com/;     fastcgi_pass   127.0.0.1:9000;#set port for php-fpm to listen on     fastcgi_index  index.php;     fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;     include         fastcgi_params;     include /etc/nginx/fastcgi_params;     } } `

使用php56的nginx服務器中配置

server {     listen 80;     server_name example2.com www.example2.com;     root    /var/www/html/example2.com/;     index index.php index.html index.htm;     #charset koi8-r;     access_log /var/log/nginx/example2.com/example2_access_log;     error_log  /var/log/nginx/example2.com/example2_error_log   error;     location / {     try_files $uri $uri/ /index.php?$query_string;     }     # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000     location ~ .php$ {     root    /var/www/html/example2.com/;     fastcgi_pass   127.0.0.1:9001;#set port for php56-php-fpm to listen on     fastcgi_index  index.php;     fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;     include         fastcgi_params;     include /etc/nginx/fastcgi_params;     } }

添加測試網頁文件

# echo "<?php phpinfo(); ?>" > /var/www/html/example1.com/info.php # echo "<?php phpinfo(); ?>" > /var/www/html/example2.com/info.php

測試

之后訪問example1.com/info.php 與 example2.com/info.php測試即可.

如果你是在本地虛擬機中配置的, 別忘了在本地host文件中添加

192.168.56.100   example1.com   example1 192.168.56.100   example2.com   example2